How Do You Change A Starter On A Dodge Ram Diesel

How to Remove the Starter in a Dodge Cummins Engine

past Christian Killian

Hemera Technologies/PhotoObjects.cyberspace/Getty Images

If your Contrivance diesel is in need of a new starter, you tin remove it yourself and salvage yourself a large repair bill. The starter motor on the diesel engine is a larger, heavy duty unit of measurement that has the higher torque required to turn over the loftier-compression diesel engines. New starters are available from the Dodge dealer and well-nigh automotive parts stores if you need to replace it with a new i. Removing the starter on a Cummins diesel is no different than removing one on a gas engine.

Stride 1

Remove the negative battery cables from both batteries on your Dodge. Set the cablevision aside, isolating it from the bombardment so it cannot make contact with the terminal while you lot are working.

Step ii

Raise the front of your Contrivance with a jack and place a gear up of jack stands nether the frame to support the vehicle. Bank check the rating on the jack stands before using them nether a large vehicle similar total-size Dodge trucks.

Step iii

Locate the starter on the driver's side of the engine. Remove the nut from the bombardment terminal on the starter with a wrench. then remove the cable and fix it bated. This is the larger wire running to the starter from the batteries.

Step 4

Locate the second, smaller last on the starter and remove the nut from the mail service with a wrench. Remove the wire from the mail service and set it aside.

Step 5

Locate the three mounting bolts that support the starter. Using a socket and ratchet, remove the lower ii bolts first. Remove the upper bolt while supporting the starter with your free manus. On some diesel models, you will detect an aluminum spacer between the starter and the bell housing. If your truck has this spacer, information technology is important to annotation the orientation of it earlier removing the starter and then information technology tin can be reinstalled correctly afterwards.

Slide the starter toward the front of the truck so that the olfactory organ cone on the starter clears the bell housing. Lower the starter out of the engine compartment and remove it from under the truck.

Things Y'all'll Need

Writer Bio